Rust converter

What is Turbonol NILRUST 600?
Turbonol NILRUST 600 is a premium rust converter which
offers ideal base for subsequent protective coat of paint.
Where to use Turbonol NILRUST 600?
v All types
of MS components
v Oil
refineries
v Steel
components and pipes
v Construction
(steel reinforcement rods)
v Marine
equipments
v Chemical
plants
How to use Turbonol NILRUST 600?
v The product
may be applied by dip, brush or spray method.
v It can be
applied at room temperature, as it is, without dilution.
v The surface
to be treated must be free from heavy soils and greases, though Turbonol
NILRUST 600 has a powerful surfactant to remove any residual oil and grease
matter.
v Apply Turbonol
NILRUST 600 liberally on the surface to be treated and leave it for 30
minutes.
v During that
time, rust would get converted into a ferroso-ferric complex.
v The treated
surface can be stored in open also, if the atmosphere is not corrosive.
v The treated
component must be left for a minimum of 24 hours before subsequent coatings.
v The surface
has to be rinsed thoroughly with de-ionized water to ensure removal of residual
chemical and dried completely before painting.
How to store Turbonol NILRUST 600?
Turbonol NILRUST 600 must be stored in a shaded place
at room temperatures. When stored in its original sealed container, it has a
shelf life of at least 24 months. When the container is opened, it is advised
to use the contents quickly. The container must be closed air-tight after every
use.
Comments
Post a Comment